Loading Point Template

according to EN 1728:2012

Art. No. #09700

  • to the determination of the checkpoints A, B, C at seat furniture for the linving range.
  • consisting of 2 shaped parts, at the ends connected with a pivot.
  • test soil horizontally, evenly and rigidly with a smooth surface.
  • stop device to shift the test article (dumps duch the device is prevented).
  • Foam material for use with the loading pad:
    - 25 mm thick foam material layer.
    - consisting of polyether.
    - impression hardness from 1100 – 100N to ISO 2439.

Armrest Measuring Device

according EN 1335 Teil 1 / ISO

Art. No. #05130

Measuring device to easy collect all described dimensions of chair armrest.

Absolutely easy and accurate measuring according to EN 1335-1 point 6.12 to point 6.15.

  • armrest lenght
  • armrest width
  • armrest height over the seat
  • armrest distance to front edge of seat

Stability Test

ANSI BIFMA X5.1 appendix A, point.12

Art. No. #05110-B

Weiht for Rear Stability Test

according clause ANSI BIFMA X5.1 appendix A, point.12

Backrest Radius Measuring Gauge

ORG - Outside Radius Gauge

Art. No. #02903-A

Measurement Range, R 150 - R 3000 mm

Application

Backrest Measuring according to EN 1335.

Radius Messung für Stuhlrückenlehen

IRG - Innenradius Messgerät

Art. No. #02903-B

Measurement Range, R 150 - R 3000 mm

Application

Backrest Measuring according to EN 1335.

Accessories

according ANSI BIFMA X5.1

Art. No. #05110-A

Drop Test Weihgt Bag

Made according Appendix A of ANSI BIFMA X5 point 12.

Loading Point Template

DIN EN 1335-3:2009 / supplement b08

Art. No. #09200-MP-0006

Loading point template: Accessory to the introduction of the test powers in the reviewing of the standing security of chiars ahead.

Ball Conical Weight Bag

big soft body according EN 1860

Art. No. #09921-A

  • Test bags from high-strength material.
  • Cut pattern precisely after norm inclusive suspension.
  • to the grill check
  • Weight / 25 kg
  • Filling / Sand
  • All weight bags can be filled also with our steel shot  bags.

     

Big Soft Body

according ISO 7892

Art. No. #09921-B

  • Test bags from high-strength material.
  • Cut pattern precisely after norm inclusive suspension.
  • to the furniture check
  • weight / 50 kg
  • filling / glass balls Ø 3mm
  • All weight bags can be filled also with our steel shot  bags.

     

Small Soft Body

according ISO 7892

Art. No. #09921-C

  • Test bags from high-strength material.
  • Cut pattern precisely after norm inclusive suspension.o the furniture check
  • weight / 3 kg
  • filling / steel shot

Thread Adapter

inside - outside - thread

Art. No. #09940- A

The thread adapter made of galvanised steel with hexagon SW17.
The adaptation of measuring encoders and pressure cylinders can
be made to support all of the required thread.

In the thread dimensions, each of the following conditinos chosen are the standard size between:

  • M8  - M10
  • M8  - M12  x 1,25
  • M10 - M12

Thread Adapter

outside - outside - thread

Art. No. #09940- B

The thread adapter made of galvanised steel with hexagon SW17.
The adaptation of measuring encoders and pressure cylinders can
be made to support all of the required thread.

In the thread dimensions, each of the following conditinos chosen are the standard size between:

  • M8  - M10
  • M8  - M12  x 1,25
  • M10 - M12

Thread Adapter

inside - inside - thread

Art. No. #09940- C

The thread adapter made of galvanised steel with hexagon SW17. The adaptation of measuring encoders and pressure cylinders can be made to support all of the required thread.

In the thread dimensions, each of the following conditinos chosen are the standard size between:

  • M8  - M10
  • M8  - M12  x 1,25
  • M10 - M12

Steel Shot Bags

Norm Test Masses

Art. No. #09600

The bags are from high strenght low wear polyamide material and in different weights and dimensions available.

Weight and Dimensions

  • 10 kg        300 x 220 mm
  •   5 kg        300 x 220 mm
  •   4 kg        140 x 220 mm
  •   2 kg        140 x 220 mm
  •   1 kg        150 x 100 mm

Special Weights for Stability Test

DIN EN 1335-3:2009 / suppolement b08

Art. No. #09400

This weight holder is fixed with an eye at your test item. Different weight discs can be inserted without any problems. Shifting is avoided by integrated disc - holders.

Available in following dimensions: 1 kg, 2 kg, 4 kg, 5 kg, 10 kg        All weight plates are zinc plated.

Special Rack for Seat Load

according to EN 1728 6.2.1

Art. No. #09900

  • the static force on the seat amounts to 1600 N (rod and disc).
  • with this utility the measuring points are loaded exactly.
  • the force is provided by standard weight discs (gummed or chromed).
  • developed in collaboration with LGA Nürnberg and Dauphin Hersbruck.

Unit for Transmission

DIN EN 1335-3:2009 / supplement b08

Art. No. #09200-MP-0008

Unit for transmission of force into arm - rests. Accessory to the introduction of the test powers in the reviewing of the standing security of chairs to the side in arm support.

  • pivoiting blade.
  • adjustable bullet.
  • corrosion resistant (zinc plated galvaniced).

Horizontal Armrest Test Device

EN 1728:2000 point 6.5

Art. No. #09701

Loading test in lateral direction of the armrest and headrests.

Two outward forces are static, as determined on the weakest point of the armrest and at leas 100 mm from each end of the armrest removed. Test device includes a pneumatic foot switch and a 2m pressure hose.

Loading Disc

Furniture Testing

Art. No. #09300

Our loading disc corresponds to the valid stands (ENV 581-2:2000) for furniture testing. It is needed for the testing of seatings with inclinalbe seats. The loading dic is composed of plywood with an integrated weight of steel.

Service Tool

according to EN 1022:2005

Art. No. #05710

  • A device to the support of the main pile of the discs
  • from adjustable seat pieces of furniture (with variable backrest). 
  • Weight of helping device = 2,5 kg.

Stability test of chairs

DIN EN 1335-3:2009 / supplement b08

Art. No. #09200-MP-0007

Stability test of chairs accordin to the standards ANSI / BIFMA X5.1, EN 1334, EN 1728, EN 12520, DIN EN 581-2, EN 1022

Description: Accessory for the introduction of the stability test of chairs.

  • adjustable to 3 sizes.
  • point adjustable.
  • corrosion proof (zinc plated galvaniced).

Drop Test Device

Art. No. #05910

Installation/backfitting in an existing test framework

 

  • a defined test weight with a pneumatic cylinder is pulled up.
  • in the deflection device can be mounted different test   weights, for example Seat Impactor nach EN 1728.
  • after reaching the desired drop height the test weight is   activated by an electromagnetic bolt.
  •  the test weight meets with almost free fall                             on the test object.

  Accessories

  • -Micro PLC-controlled cycle control  for testing in accordance with DIN/EN standards.